Empty Canister or Bags

If you have the kind of vacuum cleaner that has a canister instead of a bag, be sure to empty the canister after each and every use. This helps keep the airflow going and prevents clogs. 

If your vacuum cleaner uses replaceable bags, don’t wait until the bag is about to explode before replacing it. Buy extra bags and keep them stocked up so you can replace bags when they’re full but still have some room inside them. 

Roller Brush

The roller brush is located at the front and bottom of your vacuum cleaner. It helps separate carpet fibers so dust and debris can be sucked up. But the roller brush can also get wrapped with pet and human hair, sewing threads, and other debris. Every other use, make a point to look underneath the vacuum cleaner and remove anything that may have wrapped around the roller brush. This will ensure the roller is free to move as it should.

Vacuum Cleaner Belt

The vacuum cleaner belt is what connects the roller brush to the vacuum cleaner motor. Over time, this flexible rubber can dry out and crack. About every six months, turn your vacuum cleaner upside down, remove the bottom and carefully inspect both sides of the belt. If you see lots of cracks or the belt seems to be inflexible and/or brittle, it’s time to replace it. You can buy a replacement belt online and install it yourself.

Professional Service

Once a year, bring your vacuum cleaner to a specialty shop that services vacuum cleaners. They’ll do a full maintenance service, clean it inside and out and almost make it like new again, when possible. 

These simple steps will help to ensure that your vacuum cleaner lasts as long as possible. For more information about Denver, CO apartments and available floor plans, please contact us today!

The post How to Maintain Your Vacuum Cleaner appeared first on The Apartments at Denver Place Blog.

How to Clean Granite Properly

Granite, as a natural stone, needs a bit of attention to ensure it is cared for properly. However, there’s not much you need to do to keep it clean. Here are a few steps to take to protect the stone.

#1: Know What Not to Use

Granite is a porous stone. It absorbs much of the fluid on it, and this can create stains. Avoid any products with dye in them. You also want to keep all foods with red coloring away from the granite. When it comes to cleaning the surface, also avoid any type of bleach or abrasive material. This can damage the coating on the granite, leaving it more susceptible to stains.

#2: Warm Water and Mild Soap Is Best

A simple, mild dish soap with warm water is all that is necessary to keep granite clean. It is best to wash off the surface using a soft cloth. Then, rinse it thoroughly to remove the soap residue before drying it. This will remove nearly anything on the surface.

#3: Be Careful Using Wipe Cleaners

Some cleaning wipes say they are ideal for granite surfaces, but they still can damage the exterior coating sealing the granite. Never use wipes with a bleach product in them or those not designed for granite surfaces. If you are unsure, it is best not to use them.

Granite doesn’t allow bacteria to grow on it long. It will remain looking fantastic if you maintain it in this simple manner. You can use a bit of white vinegar on the surface if you need something with more scrubbing power for surfaces.

Find Your Next Home With Us

There’s nothing quite like the beauty of living a mile high. If you are looking for an apartment in Denver, CO, we encourage you to give our team a call. Find out which floor plans we may have available to you today. 

The post How to Keep Your Granite Countertops Clean appeared first on The Apartments at Denver Place Blog.